| CameraControl |
Camera delay setting |
| UdpNormal |
Communication - Ethernet setting |
| SerialNormal |
Communication - Serial setting |
| ParallelIO |
Communication - Parallel setting |
| Configuration |
Language setting/Startup setting |
| Logging |
Logging setting |
| Measure |
Measurement control setting |
| CameraControl (Camera delay setting) |
|
| cameraDelay0 |
STEP-camera 0 delay |
| cameraDelay1 |
STEP-camera 1 delay |
| cameraDelay2 |
STEP-camera 2 delay |
| cameraDelay3 |
STEP-camera 3 delay |
| UdpNormal (Communication - Ethernet setting) |
|
| portNo |
Port number |
| enableDhcp |
Get an IP address automatically 0: OFF 1: ON |
| ipAddress |
IP Address |
| subnetMask |
Subnet mask |
| defaultGateway |
Default gateway |
| destIpAddress |
IP address to which the data is output |
| SerialNormal (Communication - Serial setting) |
|
| rsMode |
Communication type 0: RS-232C 1: RS-422 |
| baudRate |
Baud rate (2400/4800/9600/19200/38400/576000/115200) |
| byteSize |
Data length (7, 8) |
| parity |
Parity 0: OFF 1: Odd 2: Even |
| stopBits |
Stop bit (1, 2) |
| softFlow |
Flow control 0: OFF 1: Xon/Xoff |
| delimiter |
Delimiter 0: CR 1: LF 2: CR+L |
| timeout |
Timeout |
| multiDrop |
Multidrop 0: OFF 1: ON |
| mdUnitNo |
Model number |
| broadcast |
Broadcast under the multidrop connection 0: OFF 1: ON |
| ParallelIO (Communication - Parallel setting) |
|
| polarity |
Output polarity |
| handshake |
Output control |
| cycleTime |
Output cycle |
| riseTime |
Startup time |
| outputTime |
Time to output |
| timeout |
Timeout |
| delayCount |
Delay count |
| orOutMode |
One-shot OR signal |
| orOutputTime |
One-shot OR signal time |
| Configuration (Language setting/Startup setting) |
|
| language |
Language jpn: Japanese mode eng: English mode |
| InitialSceneNo |
Startup scene number |
| initialSceneGroupNo |
Startup scene group number |
| initialMeasureOut |
Outputs the measurement result at startup 0: OFF 1: ON |
| Logging (Logging setting) |
|
| imageLogging |
Image logging 0: Logging not executed 1: Logging only at NG 2: Logging all |
| dataLogging |
Data Logging 0: Logging not executed 1: Logging only at NG 2: Logging all |
| imageLoggingDirectory |
Destination folder to save image logging |
| dataLoggingDirectory |
Destination folder to save data logging |
| imageLoggingPriority |
Image logging mode 0: Logging operation has priority 1: Measurement interval has priority |
| imageLoggingScene |
Switches the saving folder by image logging scene group/scene 0: Enable 1: Disable |
| imageLoggingJudge |
Switches the saving folder by image logging overall judgement 0: Enable 1: Disable |
| imageLoggingHeader |
String prepended to the image logging file name |
| Measure (measurement control setting) |
|
| stepError |
STEP in measure 0: ERROR ON 1: ERROR OFF |
| sceneGroupSave |
Save when switching a scene group 0: Save not performed when switching a scene group 1: Save performed when switching a scene group |
| captureDirectory |
Directory in which a screen capture is saved |